Project Description

FL/ITC Vertical Air Classifier

Single Rotor/Multiple Rotor

widely used in chemical industry, minerals (especially suitable for non-mineral materials classifying, such as calcium carbonate, kaolin, quartz, talc, mica), metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials, etc. industry.

Video
  • Available D50:2-45μm
  • Suitable for precise classifying of dry micron material.
  • Classifying efficiency (extraction ratio) can be 60%~90%.
  • The linear velocity of horizontally installed classifying wheels is up to 70m/s.
  • Speed of wheel is controlled by inverter, particle size can be adjusted freely.
  • System equipped with muffler operating under negative pressure, meet environmental requirements,noise <76dB(A).
  • The inner lining is made of alumina, no metal pollution, meeting the requirements of high purity materials.
  • Grinding is in closed system, little dust, low noise in a clean and environmentally friendly process.
  • PLC control system, easy operation.
  • In conjunction with ball mill, table roller mill and Raymond mill to form closed circulation.
  • The motor can be connected with a belt, which is stable and reliable, realizes high speed and increases the speed, and breaks through the problem that the well-known motor brand does not have a high-speed motor.
  • Optional explosion-proof design, can also be upgraded to a nitrogen circulation system to meet the processing needs of flammable and explosive oxide materials.
FL/ITC Vertical Air Classifier

Working Principle

The classifier and cyclone separator, dust collector and induced draft fan form a classifying system.
Under the action of fan suction, the material is moved from the lower inlet of the classifier to the classifying zone with the ascending airflow. Under the strong centrifugal force generated by the high-speed rotating turbine, the materials are separated and the fine particles which meet size requirements through the classifier impeller gap into the cyclone separator or the dust collector, the coarse particles entrained part of the fine particles collided with the wall and the velocity disappeared, descending along the cylinder wall to the secondary air outlet, and the coarse and fine particles were separated by the strong washing action of the secondary air. The fine particles rise to the classification zone for secondary classifying, and the coarse particles are lowered to the discharge port for discharging.

FL/ITC Vertical Air Classifier

Technical Parameters

Parameters/specificationsFL300FL360FL450FL550ITC-4ITC-5ITC-6
Production Capacity(kg/h)20~1000300~20001000~30003000~50008000~1500015000~2000020000~30000
Product Size(d97:um)6~1505~1505~1508~15010~15015~15020~150
Classifying efficiency(%)60~9060~9060~9060~9060~9060~9060~90
Installed Power(kw)11.5~42.518~6063.5~10577~120120~16090~200170~310

Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.

FL/ITC Vertical Air Classifier

Album

I don’t know how to choose the best for me.”

IT DOESN’T MATTER
LET US HELP YOU!

The raw material and the particle size, output, and application industry of the finished product determine the choice of equipment and process. As an expert, you will not be unfamiliar with this.If you have any questions, don’t worry, please leave us a message, or “Live Chat” in the lower corner of this page, or contact us via our phone or email.

ANY QUESTIONS OR DEMANDS
PLEASE CONTACT US RIGHT NOW!

Learn More & Get Quotation

Please tell us your needs.
Our engineer will send you solutions and quotes for free.

Or phone/email