Jet Mill works with cyclone separator, dust collector and suction fan to form a complete classifying system. Compressed air flow after filtration and drying would go into milling chamber from nozzles, and meet in the center area, where material would be impacted and ground and sheared. Milled powder would go up to the classifying chamber by the air flow from suction fan. The high-speed rotation of classifier wheel would create a strong centrifugal force to separate coarse powder and fine powder. Qualified fine powder would go through the wheel vane then into the cyclone separator or dust collector, while mixture of coarse powder and fine powder would fall down to the milling chamber to be milled again.
|Feed Size (mm)||<5||<5||<5||<5||<5||<5||<5||<5|
|Product Size (d97:um)||8～150||8～150||8～150||8～150||10～150||10～150||10～150||10～150|
|Production Capacity (kg/h)||5～100||10～200||20～400||50～800||150～1500||300～2000||400～6000||600～10000|
|Air consumption (m3/min)||3||6||10||20||40||60||80||120|
|Air Pressure (Mpa)||0.7～0.85||0.7～0.85||0.7～0.85||0.7～0.85||0.7～0.85||0.7～0.85||0.7～0.85||0.7～0.85|
|Installed Power (kw)||26～37||46～68||68～106||145～184||276～310||402～427||520～600||720～900|
Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.
Related Engineering Case
Applications and Services
This equipment is suitable for ultra-fine powder grinding of raw materials in chemical, mineral, metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials and other industries.