High grinding efficiency,High energy efficiency.
Calcium carbonate feed size <10 mm, could grind material size less than 10 μm (with pass rate of 97%), and fine powder size <2.5μm accounted for about 40%, specific surface area is big.It has the advantages of high-efficiency, low-loss of high-speed impact mills, and product fineness is close to jet mill.
Favorable product granularity and stability
Ideal equipment for current dry grinding method to produce non-metallic mineral fine powder.The main machine is built-in classifier. Unique structure of classifying impeller, favorable classifying effect and no particle pollution. Particle sizes can be adjusted as needed.Could produce powder of D97: 3-8μm, and also produce ordinary powder of D97: 10-40μm.
Transmission device connects with main shaft. The top of shaft connects with rotor structure. The rotor structure has peripheral shaft. Peripheral shaft is installed with roller. When the main shaft starts to rotate, peripheral shaft rotates too, which would make the rollers revolve around main shaft and also rotate round peripheral shaft. The roller would create strong centrifugal force during the rotation and revolving, and grind material with stator. The ground material would fall down to the distribution plate. The distribution plate and the main shaft would rotate at the same time, and bring material to the round ring. Under negative pressure, it would go along the distribution ring to the classifier chamber. Qualified fine powder would go through the classifier wheel and into the collector, while coarse powder would fall down back to the milling chamber for further grinding.
|Note||The above data is based on heavy calcium (feed size <10mm, Mohs hardness <5%), affected by different materials, differences in production areas etc, above data is for reference only. The particle size was measured by Omega particle size analyzer and Malvern particle size analyzer.|
Related Engineering Case
Applications and Services
This equipment is widely used in the ultra-fine grinding of raw materials such as calcium carbonate (calcite, marble, limestone, chalk), barite, kaolin, dolomite, magnesite, alumina, ultra-fine cement, slag, steel slag and other industries.