Impact Mill

According to the material characteristics requirements, can be customized and widely used for fine grinding and superfine grinding of chemical, pharmaceutical, food, mineral, building materials and other materials. The particle size range is 20mesh ~ 3000mesh, Production capacity is 5kg/h ~ 5000kg/h. Cold air, air circulation and nitrogen circulation processes are available.

2019-09-07T16:05:18+08:00

CSM-V Air Classifying Mill

  • Integration of grinding and classifying, classifying wheel of the grinder is adjusted to obtain ideal particle.
  • Available D50:2~45μm.
  • Wide application in pharmaceutical, food and chemical sectors, high cost-performance.
  • 2019-05-22T14:33:58+08:00

    CSM-H Air Classifying Mill

  • Integration of grinding and classifying, classifying wheel of the grinder is adjusted to obtain ideal particle.
  • Available D50:1.5~15μm.
  • Wide application in pharmaceutical, food and chemical sectors, high cost-performance.
  • 2019-09-07T16:07:50+08:00

    CSM-VD Air Classifying Mill

  • No dead angle, easy disassembling and cleaning.
  • Two-In-One shaft of grinding disc and classifier wheel, compact structure.
  • Especially suitable for ultra-fine grinding in pharmaceutical, food and chemical industries.
  • Available D50:2~45μm.
  • Low noise design.
  • 2019-09-07T16:09:44+08:00

    CSM-HJ Air Classifying Mill

  • Compact structure, easy to disassemble and clean, low cost.
  • Integration of grinding and classifying, classifying wheel of the grinder is adjusted to obtain ideal particle.
  • Available D50:3~45μm.
  • Wide application in pharmaceutical, food and chemical sectors, high cost-performance.
  • 2019-09-07T16:16:44+08:00

    CUM-P Pin Mill

  • No sieve, smooth discharge, high capacity and low operation cost.
  • Single or double drive, high line speed, finer particle size.
  • Available D50:10-45μm.
  • 2019-05-22T14:42:19+08:00

    CUM-F Hammer Mill

  • Selectable grinding discs, wide application, flexible match.
  • Sieve hole size 0.2mm-3mm.
  • Easy operation, disassembling and cleaning.
  • 2019-05-22T14:47:22+08:00

    CUM-L Wood Fiber Mill

  • Suitable for grinding of fiber materials such as Chinese herbal medicine and straw etc.
  • Available 80-200 mesh.
  • Finer powder can be given if to be used with classifier.
  • Negative pressure operation, friendly-environment.
  • 2019-05-22T14:48:46+08:00
    ULM Series Turbo Mill

    ULM Turbo Mill

  • Suitable for raw materials with Moh’s hardness lower than 3.
  • The grinding rotor comprises multi-layer grinding disc and several grinding blades, high grinding efficiency.
  • Durable alloy blade, replaceable.
  • Available D50:10-45μm.
  • 2019-05-22T14:52:13+08:00

    RTM Turbo Mill

  • Conic rotor and stator are installed, fineness and output can be controlled by adjusting the gap between the rotor and the stator.
  • The rotor and the stator are made of special wear-resistant steel and thus have long service life.
  • The linear speed of grinding rotor can be up to 130m/s, good grinding effect.
  • Suitable for depolymerizing nano and micron material.
  • 2019-09-07T16:19:06+08:00

    RLM Ring Roller Mill

  • Relying on the grinding roller orbital revolution and rotation on the grinding ring track to finish grinding.
  • Built-in classifying wheel, available D50:2~45μm.
  • Compared with Raymond mill or ball mill, finer powder, lower operating cost.
  • Suitable for ultra-fine processing of nonmetallic minerals such as calcium carbonate.
  • 2019-05-22T14:58:33+08:00

    MZ Herb Vibration Mill

  • Suitable for grinding high tenacity and fiber materials that are difficult to be ground.
  • Grinding is in fully closed state, free of dust, high collecting efficiency.
  • Grinding chamber with cooling jacket, operating at temperature of -30ºC~0ºC.
  • 2019-05-22T14:59:41+08:00

    MZ Vibration Mill

  • Suitable for grinding raw materials with Moh’s hardness below 9.
  • Compared with ball mill, higher grinding efficiency, small occupation.
  • Particle size can be adjustable by adjusting parameters such as grinding medium, amplitude, and frequency. The finer powder can be given in conjunction with classifier in series.
  • Suitable for powder mixing, surface coating.
  • SELECTION GUIDE
    OUR CLIENTS
    Case story

    Engineering cases

    37 companies listed in 500 international top-class ones , 89 companies listed in 500 Chinese top -class ones , 169 national level key laboratories and other customers are more than 3000. The next story is told by you.

    Enter the case site

    Learn More & Get Quotation

    Submit your request here and our engineers will contact with you as soon as possible.

    Or phone/email

    0086-532-66983518
    info@alpapowder.com