Maintenance of ultra-fine grinder
The maintenance of the ultra-fine grinding machine is an extremely important and frequent work, and it is closely coordinated with the operation and maintenance, and it should be checked by a full-time staff.
The ultra-fine grinder is an equipment that uses air separation, heavy pressure grinding, and shearing to achieve ultra-fine grinding of dry materials. Let’s take a look at the maintenance of the ultra-fine grinder:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing, it directly affects the life and operation rate of the machine, so the injected lubricating oil must be clean and well sealed. The main oil injection points of the machine include: rotating bearings, roll bearings, all gears, movable bearings, and sliding planes.
2. The newly installed wheel tyres are prone to looseness and must be checked frequently.
3. Pay attention to whether all parts of the machine work normally.
4. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time.
5. The plane of the bottom frame of the movable device should be cleaned of dust, so as to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.
6. If the bearing oil temperature rises, stop the machine immediately to check the cause and eliminate it.
7. When the rotating gear is running, if there is an impact sound, stop and check it immediately and eliminate it.
Ultra-fine grinding technology is a technology that has been developed and widely used in recent decades. At the same time, the ultra-fine grinder industry has also been rapidly developed, especially in the pharmaceutical industry, and has been more widely used. The future development prospects are promising. It has been successfully applied to many industries such as chemical industry, medicine, machinery and so on. Especially the ultra-fine grinding products produced by the vibration method have the advantages of fine grinding particle size, fully enclosed production process, no pollution, and no loss of nutrients. The ultra-fine grinding machine is all made of high-quality stainless steel to avoid the entry of other impurities; the structure of the whole machine is smooth, the material is crushed and collected sufficiently, and the loss is reduced; the grinding wheel and rail are made of special super-hard stainless steel, which is not easy to wear and has a long service life, thereby reducing the cost.